Lithium Battery (Ecco 51.2V 100Ah 5.12kWh W51100 – Wall-Mounted)
Key Features: –Wall-mounted design – easy to install and aesthetically pleasing –Lithium Iron Phosphate (LiFePO4) cells – safe, long life cycle –Max 1C charge/discharge rate –User-friendly interface –Compatible with multiple inverter brands –Supports up to 16 parallel groups –Compliant with North American UL & EU TUV standards
Advantages:
Longer Cycle Life: Up to 20× longer cycle life and 5× longer float/calendar life than lead-acid batteries
Lighter Weight: ~40% of the weight of comparable lead-acid batteries
Higher Power:2× the power of lead-acid batteries while maintaining high energy capacity
Wider Temperature Range: -20°C to 60°C
Superior Safety: Eliminates risk of explosion or combustion from impact, overcharging, or short circuits
What’s in the Box?
Battery
Battery Cables & Mounts
Battery Parameters:
Battery Type: Set to “USE”
Bulk Charge Voltage: 56.4-56.6V
Float Charge Voltage: 54V
Cut-off Voltage: 47V
Technical Specifications:
Nominal Voltage: 51.2V
Nominal Capacity: 100Ah
Total Power: 5.12kWh
Best Operating Voltage Range: 43V – 54.5V
Short Circuit Protection: Yes
Power-on Reverse Connection Protection: Optional
Max Charging Voltage: 57.6V
Best Charging Voltage: 56.4V (Recommended)
Max Continuous Output Power: 5500W
Max Momentary Output Power: 7500W
Local Parameter Configuration: Supported
Max Installation Dimensions (mm): 480 × 170 × 500
Package Size (mm): 590 × 290 × 615
Weight: 49kg
IP Class: IP54
Communication: RS485, RS232, CAN
Design Life: 15 years
Battery:
Voltage: 48V
Max Discharge Current: 220A
Floating Charge Voltage: 54VDC
Overcharge Protection: 63VDC
Charging Method: CC/CV
Warranties & Installation Requirements
5-Year Warranty
NB: (Courier for panels are at your own risk, should a solar panel get damaged during shipping, Invert Solar will not be held liable for the replacement of the solar panel)
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
