LBSA 25.6v 104Ah 2.66kWh LiFePO4 Lithium Iron Phosphate Wall Mount Solar UPS Battery – Black
The LBSA 25.6v 104Ah 2.66kWh LiFePO4 Lithium Iron Phosphate Wall Mount Solar UPS Battery is a household renewable energy storage solution developed and produced by Lithium Batteries SA. When fully installed, it is a low-voltage DC battery system with an operating voltage of 25.6V, and works with a low voltage inverter to realize the goal of energy storage for home application.
The battery pack supports parallel connection to expand capacity, which can meet various capacity requirements. It has a built-in battery management system (BMS), which can manage and monitor the pack and cell information – including voltage, current and temperature. What’s more, the BMS can balance cell charging and discharging to extend cycle life. Available in: Black, White
Product Features
2.5KW Max Continuous Load Cycle life
10 Year or 4500 cycles (9000 Cycles on BMS display) Warranty
Applicable for all batteries purchased after 2022/11/21
Specifications:
CAN Bus Comms: Victron, Growatt, Sunsynk, DEYE
Bulk + Absorption: 28v
Float : 28v
Low Voltage Cut Off: 22v
Maximum continuous Charge/Discharge For Single Unit: 100A (Recommended 75A)
Charge for Parallel units: (100A*”Units In parallel”) / 2
Discharge for Parallel units: 100A * “Units in parallel
Display Definitions:
OV – Warn: high pressure alarm
OV – Prot: over-voltage protection
UV – Warn: low pressure alarm
UV – Prot: under-voltage protection
OT-Warn：High temperature alarm
OT-Prot：Over temperature protection
UT – Warn: low temperature alarm
UT – Prot: low temperature
OC – Warn: over-current alarm
OC – Prot: over-current protection
CAPA – Warn: remaining capacity of the alarm
OFF – USE: failure alarm
SCP：Short circuit protection
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
